Town House WD131
#9
Second house is finished. This one is a nearly 100% copy of the house from the article. The angle of the roofs I cut is 60°, the plan in the article has 54°, so I first made a template from cardboard and cut down the side walls.

[Image: IMG_20170408_184514.jpg]

For this house, I carved the door directly into the foam.

[Image: IMG_20170415_112359.jpg]

Besides not having a stone ground floor, this bulding was done like the first - balsa wood framing, bird cage sand for the texturing. The shingles on this one are rectangular and cut from thicker card.

[Image: IMG_20170416_182645.jpg]

[Image: IMG_20170416_182658.jpg]

One problem I encountered, which I don't know how to solve yet, is that the glue on the roof warped it - the roof fit the walls perfectly before gluing the shingles to it... I will probably hide it with moss or a row of smaller shingles glued in one row parallel to the wall...

[Image: IMG_20170416_182710.jpg]

[Image: IMG_20170416_182739.jpg]
Reply


Messages In This Thread
Town House WD131 - matthiasstein - 03-27-2017, 05:26 PM
RE: Town House WD131 - SethDrallitoc - 03-27-2017, 10:44 PM
RE: Town House WD131 - Munin - 03-28-2017, 05:48 PM
RE: Town House WD131 - matthiasstein - 03-28-2017, 06:36 PM
RE: Town House WD131 - matthiasstein - 03-30-2017, 03:37 PM
RE: Town House WD131 - matthiasstein - 04-05-2017, 04:03 PM
RE: Town House WD131 - matthiasstein - 04-08-2017, 03:56 PM
RE: Town House WD131 - Blocky - 04-09-2017, 08:50 PM
RE: Town House WD131 - matthiasstein - 04-16-2017, 05:00 PM

Forum Jump: